On the way to the container supply, in order to ensure the drying of the goods and prevent the rot and deterioration, some desiccant is always used to dry the goods. Then, how to use the desiccant in the container?

Steps for using desiccant: firstly, the container should be inspected: mainly to check whether the container is damaged, such as whether there are holes or cracks on the wall, top and bottom of the container. After checking whether the container is damaged or not, check the moisture level of the wooden floor in the container: If possible, do not use the container with the moisture value of the wooden board exceeding 20%, which will increase the risk of moisture. If it cannot be changed, it is necessary to increase the amount of desiccant according to the water content in the container to ensure the safety of the goods. It should be noted that please don't use containers whose board humidity has exceeded 25%. The use steps of desiccant, and then all the air holes in the container are closed. Take out the desiccant sealed in the plastic sleeve. Place the desiccant, put the desiccant on the safety hook on the inner wall of the container, and stick the lower end of the desiccant on the inner wall with adhesive tape. Finally, the container door is closed.